2016+ 马自达 MX-5 Miata [ND] Racing Beat 前后防倾杆(虾须)套装

MX-5 ND Front Sway Bar - Tubular

• Racing Beat's sway bars for the MX-5 ND offers you the ability to further tune your suspension to match additional suspension upgrades or to suit your particular driving style. It's well noted that Mazda designed the MX-5 ND with a noticable amount of body roll in an effort to enchance driver feel, but this amount of roll is best isn't best suited for high performance driving. Take back control of your MX-5 by upgrading both front and rear sway bars and flatten the car during cornering, improve tranisition speed, and increase cornering power.

Specifications

• Designed and manufactured in-house by Racing Beat, our history with Mazda aftermarket sway bar applications extends over four decades! The Racing Beat 1.125" OD tubular sway bar (.188" wall) is designed to improve the handling characteristics of your MX-5 for use on the street and track. By design, the Racing Beat MX-5 ND tubular bar is 3.39 times stiffer than the stock 23mm (.896") bar. Offered with three (3) end link mounting hole positions, the Racing Beat MX-5 ND sway bar can be further fine-tuned as required to alter the handling characteristics of the MX-5.

MX-5 ND Rear Sway Bar - Tubular

• Racing Beat's tubular rear sway bar for the MX-5 ND has been designed as a matched-component for use with our ND front bar. Designed and manufactured by Racing Beat, the stiffness of this bar is 3.7 times greater than the stock .433" OD stock bar.

Specifications

• The diameter of the Racing Beat tubular rear bar is 5/8" OD x .188" wall, weighs 2.6 lbs. (Stock comparison: 2.2 lbs.) and features three (3) end link attachment holes. Each sway bar is supplied with replacement urethane bushings and clamps, lateral bar stopper bushings, lubricating grease, and detailed installation instructions.

A set with front and rear sway bar.